Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
8.1. Specifications
8.2. Coupling adjustment
8.3. Coupling cable
8.4. Coupling pedal
8.5. Coupling
8.6. Mechanism of switching off of coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


8.3. Coupling cable

The lever is in the top part of transmission.


1. Find a cable of coupling and release a lock-nut of a cover of a cable and an adjusting nut with a corrugated wreath.
2. Unhook a cable and get a cable cover from an arm.
3. In salon disconnect a cable from a pedal for what it can be necessary to remove the forward panel.
4. Stretch a cable through a partition of a motor compartment, it is possible to unscrew also two bolts of fastening of the holder of a cover and to remove the holder together with a cable.
5. Unbend brackets and get a cable.
6. Check existence on a cable of wear tracks and damages.
7. Check freedom of moving of a cable in a cover. Keep in mind that at installation into place the cable can jam, despite seeming ease of its moving in completely straightened condition.


1. Grease tips of a cable and pass through a partition.
2. Fix the holder of a cover.
3. Dress a cable on a pedal.
4. Lay a cable and fix brackets.
5. Dress a cable on the lever of a fork and adjust a coupling pedal.

8.2. Coupling adjustment

8.4. Coupling pedal