Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
8.1. Specifications
8.2. Coupling adjustment
8.3. Coupling cable
8.4. Coupling pedal
8.5. Coupling
8.6. Mechanism of switching off of coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







8-2-regulirovka-scepleniya.html

8.2. Coupling adjustment


Adjustment of height of a pedal of coupling

N.Vysota of a pedal

And. Free wheeling of a pedal of coupling

1. Arm

2. Lock-nut

3. Adjusting bolt

4. Rug

5. Waterproofing

6. Antinoise slip

7. Floor

Adjustment is reduced to check and exposure of height and a free wheeling of a pedal.

PERFORMANCE ORDER
1. Having removed a rug in feet of the driver, measure distance from a body floor to a pedal.
2. If the distance to a rug is measured, to result add thickness of a rug.
3. If the distance differs from standard, unscrew a lock-nut of an adjusting bolt (or the sensor of switching off of coupling) and rotate a bolt (or the sensor) before receiving the necessary distance.
4. After adjustment tighten a nut with the set moment.
5. For expansion of space remove the bottom forward panel.
6. Check a free wheeling of a pedal.
7. Press a pedal a finger and measure distance to feeling of weakness in resistance to moving.
8. In need of adjustment release a cable lock-nut on the lever of a fork of switching off of coupling (working in a motor compartment) and rotating a nut with a nakatka, adjust a lever course to norm (2,5–3,5 mm).
9. Again check a free wheeling of a pedal and tighten a lock-nut.
10. Establish all removed details.


8.1. Specifications

8.3. Coupling cable