Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.3. Service through each 30000 km or 12 months
2.4. Service through each 60000 km or 2 years
2.5. Service through each 60000 km or 12 months
2.5.1. Oil replacement in a manual transmission
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







2-5-1-zamena-masla-v-mekhanicheskojj-kpp.html

2.5.1. Oil replacement in a manual transmission

PERFORMANCE ORDER
1. Oil is expedient for changing right after a trip that the engine and a check point were heated-up to working temperature.
2. Park the car on an equal surface, put on the hand brake and switch off ignition. For expansion of working space lift a forward part of the car and establish on supports. Keep in mind that the car is required to be lowered, that at check of level of oil to receive exact indications.
3. Wipe a stopper of a control opening (this opening is also intended and for oil filling) which is in a forward part of a case of a check point. Unscrew a stopper and wipe.
4. Substitute the pallet under a drain stopper which is on the left side in a case of differential of a check point.
5. Merge oil in the pallet, having taken measures not to burn. Carefully clear jams of drain and control openings, having removed metal particles from magnetic inserts.
6. After running off of oil clear carvings on jams and in a case, tighten a drain stopper with the set moment. If the car was lifted, lower it on wheels.
7. Check point filling – quite labor-consuming operation. Before check of level it is necessary to wait a long time that oil completely flew down. Keep in mind that during check of level of oil the car should be in a check point on a flat equal surface.
8. Fill in in a check point oil of the necessary brand and in the necessary quantity, then check level (see subsection 2.2.8). If in a check point the standard amount of oil is filled in, and at check of level a lot of oil follows, wrap a stopper of a control opening and make a short trip that oil was evenly distributed on internal space of a case and check point details. Having come back to a former place, again check level.
9. If level corresponds to norm, wrap a stopper with the set moment.


2.5. Service through each 60000 km or 12 months

3. Engines