Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.3. Service through each 30000 km or 12 months
2.4. Service through each 60000 km or 2 years
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







2-1-tekhnicheskie-dannye.html

2.1. Specifications

Recommended lubricants and liquids – see subsection 1.12.7.

Refueling capacities (l)
Oil for the engine
3,2
Cooling system:
  – cars from a manual transmission
5,5
  – cars with automatic transmission
5,9

Transmission
Manual transmission, engine of 1,4 l
2,8
Manual transmission, engine of 1,6 l
2,9
In total and/m with automatic transmission
7,0
Liquid volume in the power steering
1,0
Fuel tank
50
Oil filter
Liquid freezing point in cooling system:
  – 28 % – antifreeze
- 15 ° With
  – 50 % – antifreeze
- 30 ° With

Fuel system
Filtering element of the air filter
Carburetor engines
Champion W247 type
Engines with fuel injection:
  – engine of 1,4 l
Champion type (not folding)
  – engine of 1,6 l
Champion U548 type
Fuel filter:
  – carburetor engines
Champion L110 type
  – engines with fuel injection
Champion L215 type
Idling turns:
  – carburetor engines from a manual transmission
750 (± 50) rpm
  – engines with fuel injection from a manual transmission
700 (± 50) rpm
  – carburetor engines from an automatic transmission
850 (± 50) rpm
  – carburetor engines from an automatic transmission
800 (± 50) rpm
The contents WITH:
  – without converter

1,5 (± 0,5) %

  – with converter

not higher 0,5 % (are not regulated)

Ignition system
Ignition moment (idling)
Carburetor engines
GA14DS (at the disconnected hoses of a vacuum regulator and a retsirkulyatsiya)
0 ± 2 to VMT
GA14DS (hoses of a vacuum regulator and a retsirkulyatsiya are attached)
10 ± 5 to VMT
GA16DS (at the disconnected hoses of a vacuum regulator and a retsirkulyatsiya)
2 ± 2 to VMT
GA16DS (hoses of a vacuum regulator and a retsirkulyatsiya are attached)
10 ± 5 to VMT
Engines with fuel injection
10 ± 2 to VMT
Type of spark plugs:
  – carburetor GA16DS engines
Champion RС7YCC4 or RС7YC4 type
  – other engines
Champion RС9YCC4 or RС9YC4 type
Gap between electrodes
1,1 mm

Brakes
Limiting thickness of overlays of disk brakes
2,0 mm
Limiting thickness of overlays of drum-type brakes
1,5 mm
Deflection of belts of a drive of hinged units (mm):
  – generator and pump of the hydraulic booster
7–9, limiting – 11
  – the generator without the pump of the hydraulic booster
7–9, limiting – 10
  – conditioner compressor
6–8, limiting – 9,5
  – pump of the hydraulic booster

4–6, limiting – 7,5


Prevention

The deflection of a belt is measured at effort of 10 kgfs (see the text), for a new belt value should be reduced by 1 mm.


Inhaling moments (N of m)

Engine pallet
34
Spark plugs
25
Nut of a roller of a natyazhitel of a belt of the conditioner
28
Drain stopper of the block of cylinders
40
Nuts of wheels
108
Bolts of fastening of seat belts
50
Check point jams:
  – control opening
29
  – the drain
29
  – drain stopper of automatic transmission
34


2. Maintenance

2.2. Service through each 15000 km or 6 months