Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
14.1. Specifications
14.2. Detection of malfunctions
14.3. Safety locks and relay
14.4. Switches
14.5. Lamps of external lighting
14.6. Lamps of internal lighting
14.7. Devices of external lighting
14.8. Adjustment of headlights
14.9. Dashboard
14.10. Sound signal
14.11. Cable of a drive of a speedometer
14.12. Lever of brushes of a screen wiper
14.13. Electric drive of a cleaner of a windscreen
14.14. Electric drive of a cleaner of back glass
14.15. Details of screen wipers
14.16. Radio tape recorder
14.17. Loudspeakers
14.18. Aerial
14.19. Pillows of system of safety
14.20. Electric equipment schemes
 







14-5-lampy-naruzhnogo-osveshheniya.html

14.5. Lamps of external lighting

New lamps should correspond to the replaced completely. At replacement be convinced of purity and reliability of contacts.

Replacement

PERFORMANCE ORDER
Headlights
1. Open a cowl
2. Press latches and disconnect the socket.
3. Uncover, having turned counter-clockwise.
4. Remove a rubber cover.
5. Get the holder of a lamp, having pressed on a latch.
6. Get a lamp.
7. A new lamp hold only through a pure napkin, without concerning fingers.
8. Establish a new lamp so. that the ledge of the holder came into dredging in the headlight case. Dress a cover an inscription up and attach the socket.
Dimensional lamp
1. Open a cowl
2. Press latches and disconnect the socket.
3. Get the holder of a lamp, having turned counter-clockwise.
4. Get a lamp from the holder.
5. Insert a new lamp and establish upside-down.
Turn index
1. Open a cowl and unscrew screws of a plafond of the index of turn in its top external part.
2. Disconnect the bottom hinge and hook and carefully get a plafond from a wing.
3. Get the holder of a lamp, having turned counter-clockwise.
4. The lamp fastens in the holder bayonetny connection.
5. Establish a new lamp upside-down. At installation track, that the ledge on a plafond came into a body opening.
Repeater of turns
1. Displace a plafond forward and disconnect from the wing panel.
2. Get a plafond, turn out the holder counter-clockwise.
3. Get a lamp, having pulled from the holder.
4. Establish a new lamp upside-down.
Searchlight
1. Unscrew two screws of fastening of a searchlight, adjusting screws do not touch.
2. Get a searchlight, remove a back cover, having turned counter-clockwise.
3. Get a lock ring and a lamp, disconnect the socket.
4. Undertake a lamp only through a pure napkin.
5. Insert a new lamp, having combined a ledge and dredging in a plafond.
6. Fix a lamp a lock ring, attach the socket.
7. Wrap a cover, establish a plafond and wrap screws.
Forward fog lights
1. Unscrew two screws, do not touch screws of adjustment of a bunch.
2. Disconnect the socket, get a lock ring and a lamp.
3. Establish a lamp upside-down.
Back combination of lamps
1. Open a trunk lid (a cargo compartment).
2. Get a latch and open the hatch in a back slip.
3. Get the holder of lamps.
4. Lamps fasten in the holder bayonetny connection.
5. Replace a lamp and establish the holder upside-down. On a lamp of a signal of braking / a dimensional lamp adjusting lugs are provided.
Lamp of illumination of registration plate
1. Unscrew two screws and get a plafond from a back cover.
2. Pull and get a lamp.
3. Establish a new lamp upside-down.


14.4. Switches

14.6. Lamps of internal lighting