Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-7-kapot.html

13.7. Cowl

Removal

PERFORMANCE ORDER
1. Open a cowl, designate the provision of loops on a cowl.
2. Release a hose of a stekloomyvatel from brackets, having disconnected from the union.
3. Unscrew fastening bolts to loops and with the assistant remove a cowl.
4. Check люфт axes in loops, if necessary unscrew two bolts and replace loops.

Installation

PERFORMANCE ORDER
1. Establish a cowl combine with labels on loops and tighten bolts.
2. Attach a hose and lay in brackets.
3. Adjust a cowl.

Adjustment

PERFORMANCE ORDER
1. Close a cowl and check gaps with adjacent panels of a body. If necessary weaken bolts of loops and adjust the provision of a cowl, tighten bolts.
2. After adjustment of a cowl check operation of the lock and adjust. The latch of the lock should work when the cowl is below a wing edge on 1,0–1,5 mm. Release lock bolts, adjust situation and tighten bolts.
3. If necessary adjust the provision of a forward edge of a cowl on height, rotating the rubber buffers screwed in a forward partition of a body.


13.6. Rear bumper

13.8. Cable of a drive of the lock of a cowl