Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-6-zadnijj-bamper.html

13.6. Rear bumper

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and establish on supports.
Cars sedan and hatchback
2. Unscrew 2 screws of fastening of overlays of a bumper to a back wing (to a photo at the left) and the screw of fastening of a slip to an edge of a wheel arch (a photo on the right).
3. Working in a luggage carrier, lift rugs, get caps (a photo at the left) and turn on on 2 bolts of fastening of arms of a bumper to the bottom (to a photo on the right).
4. Take a bumper (a photo at the left) and arms (a photo on the right).
5. If necessary the overlay of a bumper can be removed separately, having disconnected latches.
Cars with a compartment body
6. Remove registration plate and an arm.
7. Unscrew screws of fastening of overlays of a bumper on edges of back wheel niches.
8. Get latches and remove the lower part of an overlay of a bumper.
9. From a cargo compartment unscrew fastening bolts боковин a bumper to wings.

10. From a cargo compartment unscrew nuts of fastening of the top part of a bumper to a body.

11. For access to bolts get caps on corners of a cargo compartment.
12. Unscrew bolts, put forward a bumper, disconnect the socket of illumination of a sign and remove a bumper.

Installation

The bumper is established upside-down.



13.5. Front bumper

13.7. Cowl