Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-26-detali-perednejj-oblicovki-salona.html

13.26. Details of forward facing of salon

Removal and installation

PERFORMANCE ORDER
Perchatochny box
1. Unscrew from below two screws and get a box.
2. Assembly is carried out upside-down.
The bottom section of the forward panel from the driver
3. Unscrew screws on top and bottom edges and remove section from the forward panel.
4. Assembly is carried out upside-down.
Average part of the forward panel with push-button switches
5. Disconnect the battery from weight.
6. Remove a cover from the check point lever
7. Unscrew screws on both parties of the panel, carefully displace forward.
8. Disconnect sockets of switches and remove the panel.
9. If necessary designate routes of plaits that at assembly to lay plaits on former places.
10. Assembly is carried out upside-down. Track that ventilating nozzles entered into the corresponding air lines.
Overlays of a steering column
11. Disconnect the battery from weight.
12. Unscrew from below 6 screws, disconnect the bottom slip from the ignition lock (a photo at the left) and submit down, having disconnected from latches of the top slip (a photo on the right).
13. Transfer both levers to extreme bottom situation and carefully remove the top slip.
14. Assembly is carried out upside-down.
Dashboard casing with a ventilating nozzle
15. Remove overlays of a steering column.
16. Unscrew two top bolts and incline a column a little.
17. Unscrew screws of a decorative casing of the dashboard (two at the left, two on the right and one in the bottom of (a photo on the right) and one at the top of (a photo at the left)).
18. Carefully disconnect a casing from the forward panel. If necessary submit a column down for space expansion.
19. Assembly is carried out upside-down. The top bolts of a column tighten with the set moment.


13.25. Average section of the forward panel

14. Electric equipment