Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment


13.25. Average section of the forward panel


Under average section the sensor causing operation of a safety cushion is mounted. At works observe precautionary measures.

It is forbidden to check serviceability of a pillow any devices.

Before works disconnect the battery from weight, switch off ignition and wait not less than 10 minutes.

It is forbidden to remove the inertial sensor under average section.

At fire of a control lamp of system of safety as soon as possible address car-care center service.

Removal and installation
1. Disconnect the battery from weight.
2. Get caps, unscrew forward screws of section.
3. Displace seats forward and unscrew back screws of section.
4. Get a cover (a photo at the left) and unscrew the bottom screws of average section (a photo on the right).
5. On cars from a manual transmission remove a lever cover.
6. On cars with automatic transmission get a selector cover.
7. Displace section back, raise, carefully raise and remove from the lever of the hand brake.
8. The section is established upside-down.

13.24. Panels of facing of salon

13.26. Details of forward facing of salon