Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-24-paneli-oblicovki-salona.html

13.24. Panels of facing of salon

Internal facing panels fasten metal or plastic latches or clamps which are recommended to be got a bifurcate stripper.

In some places for removal of this panel it is required to remove the next panels.

Removal and installation

PERFORMANCE ORDER
The facing panel in a niche of feet of the driver
1. Hook and get a slip, unscrew screws.
2. Turn and get a back clamp, remove the panel.
3. Establish the panel upside-down.
Overlays of a powder
4. Disconnect an aperture sealant, hook a slip and release latches.
5. At installation press a slip before click.
Overlay of a rack of a body
6. Disconnect a door sealant, hook and remove a slip.
7. At assembly accurately insert a door sealant.
Internal panel of a door
8. See subsection 13.11.
Back shelf (sedan)
9. Remove a back armrest.
10. Disconnect two forward plastic latches of a tray of the shelf.
11. Hook behind and remove a shelf tray.
12. If necessary it is possible to remove the shelf assembled for what unscrew the bottom bolt of a seat belt and pass a belt via the shelf hatch.
13. Establish the shelf upside-down.
Internal facing of a luggage carrier (sedan)
14. For removal of the back panel remove a sealant and submit the panel up, having disconnected from brackets.
15. The flooring of a luggage carrier fastens plastic clamps. Remove arms of fixing tapes and a plafond then get rugs.
16. Assembly is carried out upside-down.
Internal facing of a luggage carrier (compartment and hatchback)
17. Get plastic caps and unscrew 4 screws of fastening of the back panel.
18. The flooring of a luggage carrier acts in film as follows.
19. Lift a back part of a flooring.
20. Hook and disconnect latches of a back part of a flooring from a body.
21. Assembly is carried out upside-down.
Internal panel trunk lids (sedan)
22. Hook and disconnect plastic latches, get the panel from brackets in a back part of a cover and remove.
23. Assembly is carried out upside-down.
Internal facing of a cargo compartment (hatchback)
24. Hook and disconnect plastic latches, turn out screws. Carefully submit the facing panel a bifurcate stripper, having got the latches hidden under a back part of the panel (a photo at the left) and take the facing panel (a photo on the right).


13.23. Seats

13.25. Average section of the forward panel