Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-17-zamok-kryshki-gruzovogo-otseka-i-ruchka.html

13.17. Lock of a cover of a cargo compartment and handle

Removal and installation

PERFORMANCE ORDER
Lock
1. Disconnect the battery from weight.
2. Remove internal panels of a cover.
3. Disconnect from the lock of draft of a drive.
4. Disunite the socket of the switch of illumination of a luggage carrier.
5. Unscrew two bolts and get the lock through an aperture in a cover.
6. Put the lock upside-down, having tracked correctness of installation of drafts.
Switch of the lock of a cover of a cargo compartment
1. Disconnect the battery from weight and remove the internal panel of a cover.
2. Unscrew 4 screws of fastening of a slip with the handle from within.
3. Unscrew nuts and release slip latches.
4. Disconnect the socket of illumination of a sign.
5. Disconnect draft from the external handle, remove a slip from the outer side of a cover, get a sealant of wires of a sign from openings in a cover.
6. Disconnect draft from the cover lock.
7. Unscrew two nuts (are shown by shooters) and get the lock switch outside of a cover. Remove laying.
8. Establish the lock switch upside-down. Replace laying, check correctness of connection of drafts, check operation of the lock.
Lock clamp
1. Disconnect latches and remove a back overlay of a cargo compartment.
2. Unscrew two bolts and remove a clamp.
3. Establish a clamp upside-down.
External handle of a cargo compartment
1. Disconnect the battery from weight and remove the internal panel of a cover.
2. Unscrew 4 screws of fastening of a slip with the handle from within.
3. Unscrew nuts and release slip latches.
4. Unscrew two screws and remove the handle.
5. Establish the handle upside-down. Check correctness of connection of drafts, check operation of the lock.


13.16. Lock trunk lids (sedan)

13.18. Details of the central lock