Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-16-zamok-kryshki-bagazhnika-sedan.html

13.16. Lock trunk lids (sedan)

Removal and installation

PERFORMANCE ORDER
Lock
1. Disconnect latches on a contour of a cover and remove the internal panel.
2. Disconnect latches from a lock cover.
3. Get and take away in a cover the socket of the switch of illumination of a luggage carrier.
4. Unscrew two bolts and get the lock from a cover.
5. Take away draft, having turned a key in the lock, and pass the switch socket.
6. Disunite the socket and remove the lock.
7. Put the lock upside-down.
Switch of the lock of a luggage carrier
1. Remove the decorative panel.
2. Get a lock ring and disconnect from the switch draft of a drive of the lock.
3. Get a bracket and remove the switch.
Establish the switch upside-down. Establish the switch upside-down.
Clamp
1. Disconnect a sealant and a slip.
2. Remove an overlay of a rug.
3. Designate the provision of a clamp, unscrew two bolts, get a clamp and disconnect a cable of a drive of the lock from the lever.
4. Establish a clamp upside-down. before installation of a slip check operation of the lock.


13.15. Cover of a cargo compartment (compartment and hatchback)

13.17. Lock of a cover of a cargo compartment and handle