Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-15-kryshka-gruzovogo-otseka-kupe-i-khehtchbek.html

13.15. Cover of a cargo compartment (compartment and hatchback)

Removal and installation

PERFORMANCE ORDER
Racks
1. Lift a cover and fix a prop.
2. On cars of a compartment and 5-дверный a hatchback release a lock-nut, turn out a hairpin of the hinge and remove the hinge.
3. On the 3rd door hatchback unscrew two bolts of an arm.
4. Slightly press a rack and, let's be straightened, remove a rack from a cover.
5. Unscrew bolts and disconnect a rack from a body.
6. Establish a rack upside-down.
Cover of a cargo compartment
1. Disconnect the battery from weight.
2. Remove the internal panel of a cover.
3. Disconnect and designate all sockets.
4. Extend sockets and conducting from a cover, having adhered for a cord and having got a through sealant. A cord leave in a cover.
5. Disconnect a hose from a nozzle of a stekloomyvatel, get a hose, having adhered for a cord.
7. Ask the assistant to hold a cover.
8. Designate the provision of loops concerning a cover.
9. Disconnect from a cover a rack.
10. Unscrew bolts and uncover.
11. Establish a cover upside-down.
12. ротяните in a cover conducting and a hose, having attached to a cord.
13. Bolts of loops do not tighten.

Adjustment

PERFORMANCE ORDER
1. Carefully close a cover and check gaps between a cover and the next panels. The cover is regulated by moving in openings of loops at the released bolts. After adjustment bolts tighten.
2. Check operation of the lock of a cover, if necessary adjust moving at the released bolts which after adjustment tighten.


13.14. Trunk lid (sedan)

13.16. Lock trunk lids (sedan)