Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-11-vnutrennyaya-panel-dveri.html

13.11. Internal panel of a door

Removal
PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. On cars with a manual window regulator hook the handle the thin tool and remove from latches. Remove a slip.
3. Carefully hook and remove an overlay of the internal handle of the lock.
4. Get caps and unscrew screws of the decorative handle, hook and remove the handle.
5. For access to the screw remove from an armrest the window regulator switch (or a guard) and unscrew the screw.
6. Unscrew other screws on a panel contour (which part is under caps).
7. On cars of a compartment unscrew fastening screws on the window regulator switch.
8. Disconnect spring latches on a panel contour, raise the panel and remove from a bracket.
9. Submit the panel on itself and disconnect sockets of the electric drive of a window regulator and the central lock. The bottom sealant of a window aperture is executed at the same time with the panel and should act in film together to it.
10. If necessary remove the water protective plastic screen, having hooked in a corner and it is accurate отслоив. Try to keep screen hermetic.

11. The panel is established upside-down. Glue the screen on all contour of a door. The bottom sealant of a window should enter into a door framework.



13.10. Doors

13.12. Door lock, switch of the lock and handle detail