Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cable of a drive of the lock of a cowl
13.9. Cowl lock
13.10. Doors
13.11. Internal panel of a door
13.12. Door lock, switch of the lock and handle detail
13.13. Glass of a door and window regulator
13.14. Trunk lid (sedan)
13.15. Cover of a cargo compartment (compartment and hatchback)
13.16. Lock trunk lids (sedan)
13.17. Lock of a cover of a cargo compartment and handle
13.18. Details of the central lock
13.19. External glasses
13.20. Windscreen, back glass and stationary glasses
13.21. Hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. Electric equipment
 







13-10-dveri.html

13.10. Doors

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the internal panel of a door (see subsection 13.11).
3. Disconnect all sockets, designate the route of conducting and get from brackets.
4. Carefully extend conducting from door openings, having got a sealant.
5. Beat out an axis of the limiter of opening of a door.
6. Designate the provision of loops on a door.
7. Supporting a door, unscrew bolts of loops and remove a door.
8. Check a condition of loops, if necessary replace, having unscrewed bolts on a body.
9. Coupling guard.
10. The bottom bolts of fastening of a case of coupling to the block of cylinders.
11. The door is established upside-down on the put labels. Replace a limiter axis. If necessary adjust a door.

Adjustment

PERFORMANCE ORDER
1. Carefully close a door, check gaps between the next panels.
2. The door is regulated by moving in openings of loops of a door and a body at the released bolts. After adjustment bolts tighten.
3. Check adjustment of the door lock, if necessary adjust clamp moving on a body rack at the released bolts which after adjustment tighten.


13.9. Cowl lock

13.11. Internal panel of a door