Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. Rack of a forward suspension bracket
12.4. Bottom lever
12.5. Spherical support of the bottom lever
12.6. Stabilizer of cross-section stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. Wheel
12.10. Switch of ignition and lock of blocking of a steering column
12.11. Steering column
12.12. Steering mechanism
12.13. Covers of steering transfer
12.14. Hydraulic actuator
12.15. Pump of the hydraulic booster
12.16. Tips of steering draft
13. Body
14. Electric equipment
 







12-9-rul.html

12.9. Wheel


Prevention

The present description does not belong to cars with a safety cushion.


Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Expose wheels in the provision of driving on a straight line.
3. On a wheel with 2 spokes remove the central slip, remove the panel of a sound signal, having disconnected latches a screw-driver inserted between a wheel and the panel.
4. On a wheel with 3 spokes disconnect a collar a screw-driver inserted into deepening of the bottom spoke.
5. Carefully hook the central slip for bottom edge, disconnect other latches and remove a slip.
6. On a wheel with 4 spokes release screws in the basis of a nave and remove a slip.
7. Disconnect wires of a sound signal.
8. Unscrew the screw of an arm of a wire (on a part of cars).
9. Designate the provision of a wheel on a shaft (the arrow specified a label of provision of a wheel on a shaft).
10. Unscrew a nut.
11. Remove a wheel with шлицов in bulk, having turned in the parties and having pulled on itself, or a stripper.

Installation

PERFORMANCE ORDER
1. Grease surfaces of details of an automatic otklyuchatel of the index of turn and a contact ring of a sound signal.
2. The wheel is established upside-down.
3. Previously be convinced that the automatic otklyuchatel is on the average situation, breakage of the switch of turns otherwise is possible.
4. If necessary establish a wheel so that spokes were symmetrized concerning the car.


12.8.5. Stabilizer of cross-section stability of a back suspension bracket

12.10. Switch of ignition and lock of blocking of a steering column