Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. Rack of a forward suspension bracket
12.4. Bottom lever
12.5. Spherical support of the bottom lever
12.6. Stabilizer of cross-section stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. Wheel
12.10. Switch of ignition and lock of blocking of a steering column
12.11. Steering column
12.12. Steering mechanism
12.13. Covers of steering transfer
12.14. Hydraulic actuator
12.15. Pump of the hydraulic booster
12.16. Tips of steering draft
13. Body
14. Electric equipment
 







12-16-nakonechniki-rulevojj-tyagi.html

12.16. Tips of steering draft

Removal and installation

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Remove a wheel.
3. Rasshplintuyte also release a nut of steering draft, выпрессуйте the tip hinge, unscrew a nut.
4. Release a lock-nut of steering draft.
5. Turn out a draft tip, having counted up number of turns, or designate an initial arrangement of a tip of draft (the label is specified by an arrow).
6. Clear draft and tip carvings.
7. Replace a tip if the cover is damaged, in a finger of the hinge is available appreciable люфт, or the finger jams in the hinge and also if the tip carving is damaged.
8. Wrap a tip on the counted number of turns.
9. Clear a konusny part of a finger attach a tip to a rotary fist.
10. Tighten a nut with the set moment.
11. Tighten a nut before combination of cuts of a nut with openings in a finger and зашплинтуйте.
12. Establish a wheel and lower the car.
13. Check corners of installation of forward wheels and tighten a lock-nut.


12.15. Pump of the hydraulic booster

13. Body