Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. Rack of a forward suspension bracket
12.4. Bottom lever
12.5. Spherical support of the bottom lever
12.6. Stabilizer of cross-section stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. Wheel
12.10. Switch of ignition and lock of blocking of a steering column
12.11. Steering column
12.12. Steering mechanism
12.13. Covers of steering transfer
12.14. Hydraulic actuator
12.15. Pump of the hydraulic booster
12.16. Tips of steering draft
13. Body
14. Electric equipment
 







12-12-rulevojj-mekhanizm.html

12.12. Steering mechanism


Prevention

The present description does not belong to the cars equipped with a safety cushion.


THE STEERING MECHANISM WITHOUT THE HYDRAULIC BOOSTER

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Remove both wheels.
3. Expose wheels in the provision of driving on a straight line.
4. Rasshplintuyte also release a nut of steering draft, выпрессуйте the tip hinge, unscrew a nut.
5. Disconnect other tip of steering draft.
6. In a motor compartment unscrew nuts (are specified by shooters) and pull together a cover of the kardanny hinge.
7. Designate mutual position of the hinge and a shaft of the steering mechanism, release a bolt (it is specified by an arrow) and disconnect the hinge.
8. Unscrew bolts and remove arms of the steering mechanism.
9. Get the steering mechanism through a niche of the right wheel (on and/m with the right wheel) or raise the steering mechanism and get from a motor compartment (on and/m with the left wheel).

Check

PERFORMANCE ORDER
1. Check existence of signs of wear or damages.
2. Check freedom of moving of a lath, be convinced absence люфтов and jammings.
3. Believe existence of deformation and lath damages.
4. Check a condition of covers.
5. Check люфт in tips of drafts.

Installation

PERFORMANCE ORDER
1. Center the steering mechanism.
2. For this purpose define number of turns of a shaft between extreme provisions of a lath.
3. From the extreme provision of a lath unscrew a shaft on a half of this number of turns.
4. Establish the mechanism and arms, tighten bolts.
5. Attach the kardanny hinge, having combined labels (if the removed mechanism is established).
6. Put on a cover, a frame and wrap nuts.
7. Attach the hinge of draft and screw a nut.
8. Tighten a nut and зашплинтуйте.
9. Attach the second draft.
10. Establish wheels and lower the car.

THE STEERING MECHANISM WITH THE HYDRAULIC BOOSTER

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Remove both wheels.
3. Turn on the union (are specified by shooters) on the steering mechanism and merge liquid.
4. Remove a forward exhaust pipe.
5. Unscrew a nut, выпрессуйте a tip and disconnect steering draft.
6. Disconnect the second steering draft.
7. In a motor compartment unscrew nuts and pull together a cover of the kardanny hinge.
8. Designate mutual position of the hinge and a shaft of the steering mechanism, release a bolt and disconnect the hinge.
9. Unscrew bolts of a collar of an arm on the left side (are specified by shooters).
10. Unscrew bolts of a collar of an arm on the right side (are specified by shooters).
11. Remove arms of the steering mechanism.
12. Remove the steering mechanism on the left side of the car.

Check

PERFORMANCE ORDER
1. Clear and check existence of signs of wear or damages.
2. Believe existence of deformation and lath damages.
3. Check a condition of covers.
4. Check люфт in tips of drafts.

Installation

PERFORMANCE ORDER
1. Center the steering mechanism.
2. For this purpose define number of turns of a shaft between extreme provisions of a lath.
3. From the extreme provision of a lath unscrew a shaft on a half of this number of turns.
4. Establish the mechanism and arms on available labels, tighten bolts.

Prevention

At first slightly tighten the bottom bolts of arms, then wrap other bolts and tighten in the specified sequence.


And. 1st stage of an inhaling

Century 2nd stage
5. Establish a forward exhaust pipe.
6. Attach the kardanny hinge, having combined labels (if the removed mechanism is established).
7. Tighten a bolt.
8. Put on a cover, a frame and wrap nuts.
9. Attach the hinge of draft and screw a nut.
10. Tighten a nut and зашплинтуйте.
11. Attach the second draft.
12. Attach tubes.
13. Establish wheels, remove air from a hydraulic actuator (see subsection 12.14).
14. Lower the car.


12.11. Steering column

12.13. Covers of steering transfer