Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
11.1. Specifications
11.2. Hydraulic actuator of brakes
11.3. Tubes and hoses
11.4. Blocks
11.5. Brake disk
11.6. Drums
11.7. Support of a forward brake
11.8. Support of a back brake
11.9. Wheel cylinder
11.10. Main cylinder
11.11. Brake pedal
11.12. Vacuum amplifier of brakes
11.13. Amplifier of brakes and return valve
11.14. Lever of the hand brake
11.15. Cables of the hand brake
11.16. Adjustment of the hand brake
11.17. Switch of a signal of braking
11.18. Switch of a lamp of the hand brake
11.19. Anti-blocking system
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







11-9-kolesnyjj-cilindr.html

11.9. Wheel cylinder


Details of the wheel cylinder of drum-type brakes
1. Cover

2. Piston head

3. Piston

4. Piston cuff

5. Cylinder

6. The union for air removal

7. Cap

Union and bolts of the wheel cylinder

A.Bolty

B. Union


Removal

PERFORMANCE ORDER
1. Remove drums.
2. Remove blocks.
3. For decrease in losses of liquid densely wrap a tank stopper, having laid a polyethylene film, or press hoses.
4. Clear bolts of fastening of the cylinder to a board of a brake and the union.
5. Unscrew the union and muffle a tube and an opening in the cylinder.
6. Unscrew bolts and remove the cylinder.

Dismantling

PERFORMANCE ORDER
1. Clear from the cylinder a dust and dirt, having wiped rags moistened in alcohol.
2. Remove covers.
3. Put on cylinders identification labels.
4. Get pistons and a spring.
5. All a sealant of the cylinder are subject to obligatory replacement.
6. Check a condition of the piston and an internal surface of the cylinder.
7. In the presence of defects on these details the cylinder assembled replace.
8. Before assembly carefully clear all details, pistons, a spring and cuffs grease with brake liquid.
9. Put on cuffs pistons.
10. Carefully enter into the cylinder the first piston, being guided on the labels put at dismantling.
11. Establish a spring and the second piston.
12. Put on covers the cylinder, having greased their edges with brake liquid.

Installation

PERFORMANCE ORDER
1. The cylinder is established upside-down.
2. Remove air only from a hydraulic actuator of a brake of a wheel (if integrity of other contours was not broken).


11.8. Support of a back brake

11.10. Main cylinder