Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
11.1. Specifications
11.2. Hydraulic actuator of brakes
11.3. Tubes and hoses
11.4. Blocks
11.5. Brake disk
11.6. Drums
11.7. Support of a forward brake
11.8. Support of a back brake
11.9. Wheel cylinder
11.10. Main cylinder
11.11. Brake pedal
11.12. Vacuum amplifier of brakes
11.13. Amplifier of brakes and return valve
11.14. Lever of the hand brake
11.15. Cables of the hand brake
11.16. Adjustment of the hand brake
11.17. Switch of a signal of braking
11.18. Switch of a lamp of the hand brake
11.19. Anti-blocking system
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







11-14-rychag-ruchnogo-tormoza.html

11.14. Lever of the hand brake

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the central section of the forward panel (see subsection 13.25).
3. Completely release the hand brake.
4. Disconnect the socket from the switch of a control lamp.
5. Unscrew a nut and disconnect an adjusting bolt from the lever.
6. Previously count up quantity of strings of a carving to a nut.
7. Unscrew two bolts and remove the lever.

Installation

PERFORMANCE ORDER
1. The lever is established upside-down.
2. Unscrew a nut on in advance counted up number of strings of a carving, check work of a brake and if necessary adjust.
3. Before installation of the panel check serviceability of the switch and a control lamp.


11.13. Amplifier of brakes and return valve

11.15. Cables of the hand brake