Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
11.1. Specifications
11.2. Hydraulic actuator of brakes
11.3. Tubes and hoses
11.4. Blocks
11.5. Brake disk
11.6. Drums
11.7. Support of a forward brake
11.8. Support of a back brake
11.9. Wheel cylinder
11.10. Main cylinder
11.11. Brake pedal
11.12. Vacuum amplifier of brakes
11.13. Amplifier of brakes and return valve
11.14. Lever of the hand brake
11.15. Cables of the hand brake
11.16. Adjustment of the hand brake
11.17. Switch of a signal of braking
11.18. Switch of a lamp of the hand brake
11.19. Anti-blocking system
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







11-1-tekhnicheskie-dannye.html

11.1. Specifications


Type of brakes: double-circuit with the vacuum amplifier, on a part of cars the anti-blocking system (ABS) with back disk brakes is established. On cars without ABS system back brakes drum-type. The hand brake with a hummock drive

Forward brakes
Type
Disk (continuous disks on cars of 1,4 l and 1,6 l ventilated on cars)
Designation:
  – on cars of 1,4 l
CL18C
  – on cars of 1,6 l
CL18VD
Diameter of a disk (all cars)
240 mm
Thickness of a new disk:
  – CL18C
12,0 mm
  – CL18VD
18,0 mm
The limiting:
  – CL18C
10,0 mm
  – CL18VD
16,0 mm
Disk palpation
no more than 0,07 mm
Thickness of slips
not less than 2,0 mm
Back disk brakes
Designation
AD7HA
Diameter of a disk (all cars)
234 mm
Thickness of a new disk
7,0 mm
The limiting
6,0 mm
Disk palpation
no more than 0,07 mm
Thickness of slips
not less than 2,0 mm
Back drum-type brakes
Designation
LT18C
Internal diameter of a drum:
  – the new
180 mm
  – the limiting
181 mm
Ovality
0,03 mm
Thickness of slips
not less than 1,5 mm
Pedal
Distance from a body floor:
  – for cars with the right wheel:
     • from a manual transmission
155-165 mm
     • with automatic transmission
164-174 mm
  – for cars with the left wheel:
     • from a manual transmission
148-158 mm
     • with automatic transmission
157-167 mm
Free wheeling of a pedal
1–3 mm
Vacuum amplifier
Diameter of a diaphragm:
  – on cars of 1,4 l
205 mm
  – on cars of 1,6 l:
     • the primary
180 mm
     • the secondary
155мм
Vystupaniye of a pusher (at depression of 500 Torahs):
  – C180 and S180 amplifiers
4,875-5,125 mm
  – amplifiers M165T, М195Т, S205 and C205
10,275-10,525 mm
Regulator of pressure of back brakes
In cars of 1,4 l and 1,6 l without ABS system:
  – with the right wheel
the dosing-out valve on 2 contours, is mounted separately from the main cylinder
  – with the left wheel
the dosing-out valve on 2 contours, is built in the main cylinder
In cars of 1,6 l with ABS system
The valve of double loading with variable factor of pressure decrease and a bifurcation point
Diameter of the main cylinder
20,64 mm
Hand brake
Number of clicks of complete braking:
  – for drum-type brakes
5–6
  – for disk brakes
7–8
Number of clicks of inclusion of a control lamp
no more than 1

Inhaling moments (N of m)

The union for pumping
10
Nuts of unions of tubes
16
Bolt of the ring union (banjo)
18
Fingers of a support of forward brakes
25
Bolts of fastening of a forward support to an arm
60
Fingers of a support of back brakes
35
Bolts of fastening of a back support to an arm
45
Nut of the clown of the hand brake
40
Bolts of the wheel cylinder of back brakes
8
Bolts of a board of a brake of back drum-type brakes
45
Nuts of fastening of the main cylinder
10
Bolts and nuts of an arm of a pedal and vacuum amplifier
15
Bolts of the lever of the hand brake
10


11. Brakes

11.2. Hydraulic actuator of brakes