Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
10.1. Specifications
10.2. Semi-axis removal
10.3. Semi-axis installation
10.4. Repair of a semi-axis and replacement of protective covers
10.5. Check of CV JOINTS
10.6. Bearing of an intermediate support of the right semi-axis
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







10-5-proverka-shrusov.html

10.5. Check of CV JOINTS

PERFORMANCE ORDER
1. If at checks (see subsection 2.3.16.2) there is a suspicion on wear of the CV JOINT, arrive as follows.
2. Remove a wheel cap.
3. Remove a cap of a wheel and check an inhaling of a nut of a semi-axis.
4. If there are indications that the nut is tightened insufficiently, get шплинт, a lock washer and a pro-rate.
5. Check an inhaling a dinamometrichesky key, establish into place removed details and зашплинтуйте new the shplinty.
6. Execute these operations on other wheel.
7. Slowly moving around with completely turned out wheel, whether check there will be clicks "metal on metal" from a forward part of the car.
8. Completely turn out a wheel in other party and again listen.
9. If metal clicks are distributed, the external hinge of a semi-axis is worn-out.
10. If vibrations which amplify at dispersals are listened, the internal hinge is worn-out.
11. For check of wear of the hinge remove and disassemble a semi-axis and check everything люфты and a condition of hinges.
12. The hinge changes only assembled.


10.4. Repair of a semi-axis and replacement of protective covers

10.6. Bearing of an intermediate support of the right semi-axis