Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
10.1. Specifications
10.2. Semi-axis removal
10.3. Semi-axis installation
10.4. Repair of a semi-axis and replacement of protective covers
10.5. Check of CV JOINTS
10.6. Bearing of an intermediate support of the right semi-axis
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







10-2-snyatie-poluosi.html

10.2. Semi-axis removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Merge liquid or oil from a transmission case.
3. Get шплинт and a koronchaty washer.
4. Fix a nave (the adaptation or ask the assistant to press a brake) and unscrew a semi-axis nut.
5. Remove a brake support, take aside and fix, without disconnecting a hose.
6. Rasshplintuyte also unscrew a nut of steering draft.
7. Vypressuyte a tip from a pin eye.
8. Unscrew a nut of the bottom spherical support and выпрессуйте a support from a pin.
9. Screw a nut on a semi-axis and in easy blows beat out a semi-axis from a nave, immediately fix the semi-axis termination.
The right semi-axis on cars of early release
10. Hook mount and get a semi-axis from a transmission case.
11. Press so that the lock ring was pressed into a flute and left a leading gear wheel of differential.
12. Remove a semi-axis.
The right semi-axis with an intermediate support on cars of late release
13. Unscrew bolts of the case of the bearing of an intermediate support.
14. Turning both hands displace the case of the bearing and hook, having inserted the lever between the case and an arm.
15. Remove a semi-axis assembled with the bearing and the CV JOINT case.
The left semi-axis on all cars, except equipped with automatic transmission
16. Procedure same, as at removal of the right semi-axis. At removal of a semi-axis do not damage an epiploon.
The left semi-axis on cars with automatic transmission
17. For removal of the left semi-axis at first it is necessary to remove the right semi-axis.
18. Carefully pass a prutok or a big screw-driver, through a window of the right semi-axis, against the stop in an end face of the left semi-axis, without having damaged thus a leading gear wheel, satellites or an axis of satellites (1 – a screw-driver sting, 2 – a leading gear wheel, 3 – a semi-axis, 4 – the roller of satellites).
19. In easy blows beat out a semi-axis. Thus the lock ring should be pressed into a flute and to leave a leading gear wheel of differential.
20. Remove a semi-axis.


10.1. Specifications

10.3. Semi-axis installation