Nissan Sunny service from 1991 to 1997 of release in n-14 body.
1. Maintenance instruction
1.1. Control panel
1.2. Alarm lamps
1.3. Arrangement of identification plates
1.4. Radio receiver AM-UKV with electronic control
1.5. An AM-VHF-radio tape recorder with electronic control
1.6. Catalyst
1.7. Keys
1.8. Ignition switch and ignition lock
1.9. Handle of management of a screen wiper and windscreen washer
1.10. The combined switch of a driving and passing beam
1.11. Heating of back glass and lateral mirrors
1.12. Possible malfunctions
2. Maintenance
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semi-axes
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







1-8-pereklyuchatel-zazhiganiya-i-zamok-zazhiganiya.html

1.8. Ignition switch and ignition lock

The ignition lock with the anti-theft device

 

Carburetor engine

«START» – joins a starter. Before engine start-up a control lever of an automatic transmission establish in a position of "R" or «N», and at a mechanical transmission establish in a position of idling and hold a pedal of coupling pressed. How the engine was got, release a key. It comes back back to «ON» positions. A starter include no more than on 15 villages.

«ON» position – the engine and all consumers of an electric current are included.

It is a usual position of the switch for a movement mode. It is not necessary to leave a key in «ON» position if the engine does not function. Otherwise the accumulator is discharged and there can be violations in ignition system.

"ASS" position – consumers of the electric power as, for example, radio, work, but the engine is disconnected.

«LOCK» position – the steering wheel is blocked. The key can be extended only in this situation.

For ignition key turn from "ASS" position in «LOCK» position it is necessary to press it at first inside. If at engine start-up the key jams in «LOCK» position, check, whether the key is completely inserted. Then carefully rotate a key, turning a wheel there and back. When the car is in movement, a key do not press, do not turn in "ASS" position, do not extend, as all these actions block a wheel and do not give possibility to operate by car. If it is necessary to disconnect the engine when the car is in movement, it is allowed to turn a key only to "ASS" position. At all do not press a key and do not extend it.

Diesel engine

The position of "ON" serves for inclusion of kalilny candles and a prestarting warming up of the engine. After the engine was got, the key comes back to this position and all power consumers are in working condition.

When the key turns in «ON» position, the display bulb of kalilny candles flashes. The bulb dies away, when kalilny candles warmed up the engine to such an extent that it was got. It is a usual position of the switch for a movement mode. In order to avoid a discharge of the accumulator it is not necessary to leave a key in «ON» position if the engine does not function.

«START» position – joins a starter.

Before engine start-up the lever of switching establish in an idling position, squeeze out a coupling pedal. How the engine was got, release a key. It back comes back to «ON» position. With He let's to a starter work more than 30 pages.

"ASS" position – such power consumers as, in working condition, but the engine is disconnected by radio.

«LOCK» – a steering wheel is blocked. The key can be extended only in this situation.



1.7. Keys

1.9. Handle of management of a screen wiper and windscreen washer